24hr Commercial Strata:
Domestic Mon–Fri 8am–4pm:

Grifco+ 2.0 E945/E945G Genuine Remote (supplied as E960G)

The Grifco+ 2.0 E945/E945G Genuine Remote is the listing to use when the handset you are replacing is a small Grifco unit with Grifco+ 2.0 printed on the front. That printing is the test and it is worth doing before anything else, because similar cases have been used across generations and a label is more reliable than a shape.

Grifco+ 2.0 E945/E945G Genuine Remote (supplied as E960G), a genuine Grifco remote control
Grifco

Buy the Grifco+ 2.0 E945/E945G Genuine Remote (supplied as E960G)

$69.60 including GST

In stock, dispatched the same or next business day

What is actually shipped

This model is superseded. Your order is supplied as the Grifco+ 2.0 E960G Genuine Remote, which suits the same openers and codes the same way. If you need the model named above specifically, call us on 1300 736 683 before ordering.

Standard tracked shipping $12.00 in 2 to 6 business days, express $15.00 in 1 to 3 business days. Not sure this is the right part? Send a photograph of the front and back of your existing unit to service@allgate.com.au and we will confirm it before you buy.

About the Grifco+ 2.0 E945/E945G Genuine Remote (supplied as E960G)

Read the next part before ordering. What ships against this listing is the E960G, which is also disclosed in the callout above the Add to cart button. It is the right outcome rather than a compromise, but you should know it in advance so nothing in the parcel comes as a surprise.

Grifco's handsets code as one family. The E943G, the E945G and the E960G all speak to the same drives and sit in a receiver together, so a property running two older handsets and one new one carries on exactly as it did. Adding an E960G does not mean clearing the receiver and recoding everything else.

The physical difference is real and worth knowing so the two can be told apart later. The case on this listing is published at 3.68 cm across, 6.02 cm long and 1.28 cm deep, which is short and comparatively broad. The E960G that arrives is published at 3.14 cm across, 7.35 cm long and 1.18 cm deep, which is longer, narrower and thinner. Where a drawer of remotes has lost its printing, length separates them faster than anything else.

One thing on this page deserves a straight answer rather than a shrug. This listing publishes a considerably longer model list than the E960G listing does. It names Chamberlain badged openers in the CR625EVO, CR655MYQ and CS100EVO, and a long run of Merlin ones: the MJ3800MYQ, MS65MYQ, MS105MYQ, MS125MYQ and MT110MYQ Commander units, the MR650EVO, MR655EVO, MR655MYQ, MR850EVO, MR855EVO and MR855MYQ Silentdrive and Quietdrive units, the MR550EVO Weatherdrive, the MRC950EVO Overdrive, the MT100EVO Tiltmaster, the MT120EVOPS CyclonePro, the MT3850EVO Whisperdrive, the MT50EVO EntryLift and the MT60EVO Powerace, along with the Steel-Line ST50EVOB and ST50EVOC and the E-Drive, S-Drive, LS-Drive and LR-Drive Grifco 2.0 units. The E960G listing names the four Grifco drives and a receiver, then covers the rest in words rather than model by model.

Here is where we will be plainer than either listing manages. The E960G we supply does code to Merlin openers of this generation as well as to the Grifco drives, and that is a check we have made rather than a conclusion we drew from a table. It does not code to the Chamberlain badged CR and CS units, so if the name on your motor housing reads Chamberlain, this is the wrong page and a call to 1300 655 600 will save you a return. The Steel-Line ST50EVOB and ST50EVOC appear on this listing as well and have not been through the same check, so ring on those rather than assuming either way.

A CR2032 comes fitted under a cover that needs a tool, coding instructions are supplied with it, and third party AS62368.1 testing is published against it.

If more than one handset is being bought, buy them all against the current name rather than the older one. Allgate supplies the E960G here because that is what comes through from the supplier, and a property that converges on a single current part is a property where the next replacement is a five minute decision instead of an archaeology exercise.

Product details

Brand
Grifco
Type
Genuine part
Category
Remote controls
Battery
CR2032 3V
Manufacturer part number
E960G
Allgate stock code
AG_E960G-001

Warning: contains a coin battery

Coin batteries are dangerous. A swallowed or inserted coin battery can cause serious injury or death within two hours.

This product is supplied with a CR2032 3V coin battery.

  • Keep new and used batteries out of reach of children at all times
  • Do not use this product if the battery compartment does not close securely. Stop using it and keep it away from children
  • Dispose of used batteries immediately and safely. A flat battery is still dangerous
  • Never swallow a battery or place one inside any part of the body. It can cause severe internal chemical burns

If you think a battery has been swallowed or placed inside any part of the body, seek immediate medical attention. Call the Poisons Information Centre on 13 11 26 or go straight to your nearest hospital emergency department.

Delivery, returns and fitting

Shipping costs and delivery times are shown beside the Add to cart button above. Unused parts can be returned by post within 30 days of purchase for a full refund, with return postage paid by you. Your rights under the Australian Consumer Law apply on top of that, so if the part you receive turns out not to suit your opener, call us before you program it and we will work out what does. Our full terms of sale are set out on the Allgate terms and conditions page.

Most customers fit and code a new part themselves in a few minutes using the instructions supplied. If you would rather have it done, an Allgate technician can program and test it on site anywhere we work, which is every suburb listed on the Sydney service areas page.

Not sure the Grifco+ 2.0 E945/E945G Genuine Remote (supplied as E960G) is the right part?

Buying the wrong remote is the most common mistake we see, and it is almost always avoidable with one photograph. Send a clear shot of the front and the back of your existing unit, plus one of the motor if you can reach it safely, to service@allgate.com.au and our team will tell you exactly which part suits your opener. If you would rather talk it through, our domestic line is 1300 736 683, Monday to Friday 8am to 4pm. Commercial and strata customers can reach a technician on 1300 655 600 at any hour, on any day.

You can also search the catalogue by the model number printed on your existing handset, which is the fastest way to find the match yourself.